Specifications:
- Airflow rate up to1,060 m3/h
- Power output up to120 W
- Noise level up to65 dB
- Fan typecentrifugal
- Voltage220 V
- Dimensions LxWxH30х30х15.4 cm
- Weight6 kg
MAX Emperor is thought out to the last detail
No more dust being blown out
An ultra powerful centrifugal fan is installed behind the filtration chamber. The vacuum it creates allows the device to completely suck up the dust. At the same time, the airflow always has a constant direction. Even if you use a clogged air filter, the air will not blow back out.
The nail dust collector sucks up the dust perfectly! The fan is up to 13.7 times more powerful and efficient than the one in a standard nail dust collector.
The performance capacity of the fan is up to 1,060 m³/hour. It’s an incredible characteristic! By way of comparison, the value of this parameter for the MAX Ultimate 7 is up to 401 m³/hour. The greater the volume of air it runs through, the more dust it can capture.
The power and noise levels are adjustable.
When driving a sports car, there is no need to always go at full throttle. The same rule applies for nail dust collectors. The maximum power level is reserved for a particular application. However, if it is required, it is always available. Adjust the power of your nail dust collector the way you want.
The size of the suction area is adjustable.
The nail dust collector is equipped with an in-built diaphragm which allows you to change the diameter of the suction area from 175 mm to 115 mm. You can use the standard operation mode to maximize the size of the suction area or reduce it to significantly increase the suction power!
No more disposable filter cloths!
The nail dust collector is equipped with a ring filter. The filter ribs are installed in parallel to the flow of air being purified; therefore, almost the entire surface area is engaged in its operation. As a result, it needs to be cleaned less often compared to nail dust collectors in which nail dust accumulates directly on the filter surface. Thus, there is no need to use filter cloths.
The nail dust collector fights dust, not gravity.
On Earth, all objects fall from top to bottom. Nail dust is no exception. You need to capture dust where it inevitably tends to get, instead of pulling it up. That's why MAX EMPEROR is built into the manicure table top. This way, dust doesn't stand a chance.
MAX EMPEROR is an excellent choice for both beginners and professional nail artists
Main advantages of MAX Emperor over similar devices
An incredibly powerful fan capable of pulling particles weighing over 30 grams
The fan performance capacity is up to 13.7 times higher compared to those used in a conventional nail dust collector. The power output of the device is up to 120 W. The airflow volume capacity of the fan is up to 1,060 m3/h. These are very impressive figures, surpassing most similar solutions.
Place an order
Convenience in every single detail
The design of the nail dust collector has been carefully thought out and developed. Since 2011, we have been studying all the nuances of a nail artist’s work process and know how to properly make high-quality nail dust collectors.You won't need to crawl under the table to switch on and adjust the settings of the nail dust collector or to replace its filter. All control is performed via the upper cover of the device.
The power and noise levels of the nail dust collector are adjustable. In addition, you can adjust the size of the suction area within the range between 175 mm and 115 mm. All of these features combined provides you a phenomenal user experience.
The nail dust collector is equipped with a ring filter with an area of 2,798 sq. cm, the ribs of which are installed in parallel to the airflow. Due to its design, almost the entire area is engaged in filtration. This means that it needs to be cleaned less often than its competitors in which nail dust is accumulated directly on top of the filter.
The nail dust collector is equipped with a ring filter with an area of 2,798 sq. cm, the ribs of which are installed in parallel to the airflow. Due to its design, almost the entire area is engaged in filtration. This means that it needs to be cleaned less often than its competitors in which nail dust is accumulated directly on top of the filter.
Place an order
Fitting into any interior design
The device will fit perfectly into the interior of your workstation and will be of great assistance in the fight against nail dust.When installed in the manicure table top, it helps save work space. If necessary, the nail dust collector can be equipped with a stand and used for pedicures.
Place an order
Each nail dust collector undergoes three phases of quality control
The employee responsible for the preparatory processes verifies the quality of components
The assembly worker tests the operation of the nail dust collector immediately after assembly
The packer tests the operation of the nail dust collector before sending it to the customer
What is the difference between MAX nail dust collectors with and without dust filter bags?
Conventional models of nail dust collectors
Bagless nail dust collectors
Design
Conventional nail dust collectors purify the air by passing it through a dust bag made of filter cloth. Thus, the air first passes through a fan, and then it is purified by being blown through a filter bag.
A bagless nail dust collector has a filter installed first, through which the air passes. At the same time, the fan itself is mounted behind the filter and creates vacuum which enables the air purification process.
Possibility of dust blowout
Conventional nail dust collectors require regular cleaning of the filter bag. Due to the fact that the fan forces the air into the bag, as soon as its pores become clogged with dust, the air begins to be reflected off the filter walls and partially blown back out. This leads to a dust blowout.
Bagless nail dust collectors will never blow any dust out, as the fan here draws in the air instead of pumping it. However, the filter also requires regular maintenance, otherwise the device will lose its efficiency.
Performance efficiency
Conventional nail dust collectors are equipped with fans of standard size and power capacity due to their design.
The MAX EMPEROR nail dust collector is equipped with a larger and more powerful fan than those admissible for conventional nail dust collectors due to the nature of their design. This allows the device to be up to 2.64 times more efficient at pumping air than the most powerful conventional MAX Ultimate 7 nail dust collector.
The CEO of MAX answers popular questions
The CEO of MAX answers popular questions
Elena Kudryavtseva CEO at MAX Equipment LLC
What is the motor power of the MAX Emperor nail dust collector?
The motor power is 120 W. Its performance capacity is up to 1,060 m³/hour.
How noisy is this nail dust collector?
The noise level of this device is up to 65 dB. Any nail dust collector equipped with a powerful motor cannot work noiselessly. And MAX Emperor is no exception. However, for most tasks there is no point in using the maximum power level of the device. Besides, the power level, and consequently the noise level of the machine, are adjustable.
Are there any special requirements concerning the manicure table top to install the nail dust collector?
The nail dust collector can be installed in the table top up to 60 mm thick. To do this, you will need to cut a hole in it with a size of 275 mm x 275 mm. The nail dust collector can be easily installed in almost any manicure table.
Can MAX Emperor be used for pedicure?
Yes, this nail dust collector can be used for pedicure. To do this, you need to purchase a floor stand on wheels. Please note that when using a nail dust collector for manicure, it is permanently placed in a cutout in the manicure table top. Therefore, you will need to purchase a separate nail dust collector for pedicure.
What is the size of the suction area of the device?
The size of the suction area can be altered using a diaphragm with an aperture from 175 mm to 115 mm. In comparison, the suction area of the MAX Ultimate 7 built-in nail dust collector is 145 mm.
What are the dimensions of the nail dust collector?
Length 30 cm Width 30 cm Height 15.4 cm. Package dimensions: LxWxH 37х37х18 cm
How often should the filter be changed, and how to do it?
The filter unit can be easily changed through the top cover of the machine. We recommend cleaning the filter unit after approximately 25-35 operating cycles. The filter unit should be replaced with a new one every 3-6 months.
How should the filter unit be cleaned?
The filter unit should be cleaned mechanically using a brush, a household vacuum cleaner or by knocking out dust. It is necessary to prevent contact of the filter unit with water.
Should any additional filter cloths be used?
No additional filters are required for the operation of the device. A standard filter unit will suffice.
Can the dust be blown out when using the MAX Emperor nail dust collector?
No, that is completely excluded. This situation occurs in conventional nail dust collectors equipped with dust filter bags when working with a dirty dust filter bag. In a regular nail dust collector, the fan is located in front of the dust filter bag and when it is clogged, the air cannot pass through it and begins to be blown back out. In MAX Emperor, an ultra-powerful centrifugal fan is located behind the filter unit. The vacuum it creates allows it to completely suck up the dust. At the same time, even if the filter unit is heavily clogged, the direction of the airflow never changes.
What is the warranty on this machine?
The nail dust collector has a 24-month warranty.
Fast order
Please fill in the form below, and we will contact you as soon as possible